A garbage disposal is an important appliance in most modern kitchens today. It is important for making it easier to dispose of the waste that does down the sink. Because of its hard-working environment, sometimes you might have to replace your garbage disposal with a new garbage disposal. Depending on your needs, it is best to research more to end up with the best garbage disposal available.
Below, we want to look at the steps you can take if you need to remove a garbage disposal from its position.
What you will need
- Plumber’s putty
- Basket strainer
- Flat screwdriver
- Disconnecting the garbage disposal
Before you can set up the new garbage disposal, you need to remove the old model from its position. Start by unplugging the disposal from the outlet. Yes, a garbage disposal needs power to operate, so make sure it is disconnected from the wall outlet.
Proceed to remove the drain trap. This is what connects the appliance to the sink drain pipe. It is best if you can place a bowl or bucket under this drain pipe to catch any water and waste that might be in the pipes.
With your pliers, remove the trap nuts. Once these nuts are removed, you can easily pull the trap pipe down.
- Disconnect the drain line to the dishwasher
In most homes, a garbage disposal would also be connected to a dishwasher. If that is the case, you will have to also disconnect it from the dishwasher drain line. It is easy as you simply disconnect the dishwasher tube connecting to the garbage disposal.
- Time to remove the garbage disposal
Once you have completed the other steps mentioned above, it is now safe to remove the disposal. With your flat screwdriver, unlock the lower mounting ring by turning counterclockwise. Most disposals would not be attached to anything, so once you unlock the ring, be ready to catch it.
With the disposal unattached, you will only be left with the mounting assembly. At this point, loosen the mounting screws and snap the mounting ring from its position. You should be done with removing the garbage disposal from its position.
- Install a basket strainer
For those who might not be looking to install a new garbage disposal, then it is important to install the basket strainer. This will help to stop the food waster from entering the drain. We all know how it can be messy when you have a blocked drain.
Basket strainers will have different installation directions. It is best if you follow the manufacturer’s instructions for the specific basket strainer.
- Setting up the new garbage disposal
For those who have to set up a new garbage disposal, it is the opposite of removing one from the drain line. Luckily, most come with comprehensive instructions on how to set them up. Follow what the manufacturer says in the guide to have your new garbage disposal working correctly.
As you can see, removing a garbage disposal does not have to be hard. Overall, you should find the process simple and easy to follow.